{"title":"Fita de vedação interna para janelas, para uma vedação segura","description":"\u003ch2\u003eFita de vedação interna para janelas, para sua segurança\u003c\/h2\u003e\u003cp\u003eNossa \u003cstrong\u003efita de vedação interna para janelas\u003c\/strong\u003e permite uma vedação rápida e confiável. Assim, você não apenas melhora a estanqueidade ao ar das juntas de conexão das suas janelas, mas também garante uma barreira de vapor ideal. Este produto é perfeito para quem valoriza durabilidade e eficácia.\u003c\/p\u003e\u003cp\u003eCom nossa fita de vedação para janelas, você estará muito bem preparado para proteger seus ambientes contra correntes de ar indesejadas e umidade. Graças às diferentes opções autoadesivas, você pode escolher a solução ideal para suas necessidades individuais.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAutoadesiva em toda a superfície para facilitar a aplicação\u003c\/li\u003e\n\u003cli\u003eMaterial composto de manta, que pode receber reboco, para uma integração perfeita\u003c\/li\u003e\n\u003cli\u003eDisponível com faixas de butila para segurança adicional\u003c\/li\u003e\n\u003cli\u003eAdequada para substratos altamente porosos\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eConfie na qualidade da DE \u0026amp; BG DiCHT e otimize o isolamento interno da sua residência com nossa fita de vedação para janelas de alta qualidade, garantindo um ambiente interno agradável!\u003c\/p\u003e","products":[{"product_id":"fensterband-innen-rot-vollfl-sk-25m","title":"Fita para janela INTERNA, vermelha, autoadesiva em toda a superfície, 25 m","description":"\u003cp\u003e\u003cu\u003e\u003cb\u003eWindow connection tape INDOOR, red, full surface self-adhesive, 25m\u003c\/b\u003e\u003c\/u\u003e\u003cbr\u003eWindow connection tape Indoor consists of a plasterable fleece composite with 1 self-adhesive strip, optionally laminated with a butyl strip on one side or alternating. The connection film Indoor is used for fast and secure internal, airtight and vapor-retardant sealing of window connection joints and can also be used as a plasterable internal seal.\u003c\/p\u003e\n\u003cp\u003eFor highly porous substrates, we recommend a primer with butyl \u0026amp; bitumen primer if butyl is used for bonding.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eInstallation instructions window connection tape INDOOR, red, full surface self-adhesive, 25m\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eAll profile openings, e.g. cut edges of extensions and window sill profiles or continuous grooves in surface-mounted roller shutter boxes, must be sealed with sealant.\u003c\/li\u003e\n\n\u003cli\u003eThe surfaces to be bonded on the frame and masonry must be clean and dry, free of dust, grease and release agents (such as those found on new plastic profiles).\u003c\/li\u003e\n\n\u003cli\u003eThe surface coating on wooden windows should be several days old, as otherwise still escaping solvents can reduce the tape adhesion. If necessary, dirt should be removed with degreasing cleaning agents. Attention must be paid to material compatibility.\u003c\/li\u003e\n\n\u003cli\u003eFor highly absorbent, sandy substrates, pre-treat the building structure with an adhesion promoter, e.g. DRG spray primer, DRG spray adhesive or solvent-free primer.\u003c\/li\u003e\n\n\u003cli\u003eIn the event of breakouts in the masonry, a clean smooth finish must be re-created.\u003c\/li\u003e\n\n\u003cli\u003eWhen bonding, the tapes must be applied to the frame without wrinkles, parallel and pressed through. At the corners, allow the tapes to overlap and bond them in a driving rain-proof or airtight manner.\u003c\/li\u003e\n\n\u003cli\u003eThe absorption of movement must be ensured by sufficient loop formation in the area of the connection joint.\u003c\/li\u003e\n\n\u003cli\u003eMinimum bonding width on the window 15 mm, on the wall at least 30 mm\u003c\/li\u003e\n\n\u003cli\u003eThe sealing tape must be sufficiently bonded to the masonry in the area of the subsequent plaster covering (rule of thumb: at least 75% of the contact surface\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"DRG Dicht- und Klebetechnik GmbH","offers":[{"title":"150 mm","offer_id":52819078250816,"sku":"407000060250.3","price":55.3,"currency_code":"EUR","in_stock":true},{"title":"200 mm","offer_id":52819078283584,"sku":"407000060250.4","price":72.2,"currency_code":"EUR","in_stock":true},{"title":"300 mm","offer_id":52819078316352,"sku":"407000060250.5","price":104.7,"currency_code":"EUR","in_stock":true},{"title":"70 mm","offer_id":52819078349120,"sku":"407000060250.1","price":28.9,"currency_code":"EUR","in_stock":true},{"title":"100 mm","offer_id":52819078381888,"sku":"407000060250.2","price":38.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/7966\/7520\/files\/Fensteranschlussband_1.png?v=1784417251"},{"product_id":"fensteranschlussband-innen-rot-1-sk-25m","title":"Fita de conexão para janela INTERNA, vermelha, autoadesiva em um lado, 25 m","description":"\u003cp\u003e\u003cb\u003e\u003cu\u003eWindow connection tape INDOOR, red 1 SK, 25m\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eWindow connection tape Indoor consists of a plasterable fleece composite with 1 SK strip, optionally laminated with a butyl strip on one side or alternately. The indoor connection foil is used for fast and secure internal, airtight and vapor-retardant sealing of window connection joints and can also be used as a plasterable internal sealing. Primer.\u003c\/p\u003e\n\u003cp\u003eOn highly porous substrates, we recommend a primer with butyl \u0026amp; bitumen primer if butyl is used for bonding.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eInstallation instructions for window connection tape INDOOR, red 1 SK, 25m\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eAll profile openings, e.g. cut edges of extensions and window sill profiles or continuous grooves in attached roller shutter boxes, must be sealed with sealant.\u003c\/li\u003e\n\n\u003cli\u003eThe surfaces to be bonded on the frame and masonry must be clean and dry, free of dust, grease and release agents (e.g. on new plastic profiles).\u003c\/li\u003e\n\n\u003cli\u003eThe surface coating on wooden windows should be several days old, as otherwise still escaping solvents can reduce the tape adhesion. If necessary, dirt should be removed with degreasing cleaning agents. Attention must be paid to material compatibility.\u003c\/li\u003e\n\n\u003cli\u003eFor highly absorbent, sanding substrates, pre-treat the building body with an adhesion promoter, e.g. DRG spray primer, DRG spray adhesive or solvent-free primer.\u003c\/li\u003e\n\n\u003cli\u003eIn the event of breakouts in the masonry, a clean smooth finish must be created again.\u003c\/li\u003e\n\n\u003cli\u003eWhen bonding, the tapes on the frame must be applied wrinkle-free, parallel and pressed through. At the corners, overlap the tapes and bond them rain-proof or airtight.\u003c\/li\u003e\n\n\u003cli\u003eMovement absorption must be ensured by sufficient loop formation in the area of the connection joint.\u003c\/li\u003e\n\n\u003cli\u003eMinimum adhesive width on the window 15 mm, on the wall at least 30 mm\u003c\/li\u003e\n\n\u003cli\u003eThe sealing tape must be sufficiently bonded to the masonry in the area of the later plaster cover (rule of thumb: at least 75% of the contact area).\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"DRG Dicht- und Klebetechnik GmbH","offers":[{"title":"100 mm","offer_id":52819079266624,"sku":"40000040250.1","price":21.2,"currency_code":"EUR","in_stock":true},{"title":"150 mm","offer_id":52819079299392,"sku":"40000040250.2","price":26.0,"currency_code":"EUR","in_stock":true},{"title":"200 mm","offer_id":52819079332160,"sku":"40000040250.3","price":31.9,"currency_code":"EUR","in_stock":true},{"title":"70 mm","offer_id":52819079364928,"sku":"40000040250.4","price":18.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/7966\/7520\/files\/Fensteranschlussband_1.png?v=1784417251"},{"product_id":"fensterband-innen-rot-vollfl-sk-wechsels-25m","title":"Fita para janela INTERNA, vermelha, autoadesiva em toda a superfície, dupla face, 25 m","description":"\u003cp\u003e\u003cb\u003e\u003cu\u003eWindow connection films INSIDE, red, full-surface self-adhesive, alternating, 25m\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eWindow connection tape Inside consists of a plasterable fleece composite with 1 self-adhesive strip, optionally laminated with butyl strip on one side or alternating. The connection film Inside is used for fast and secure internal, airtight and vapor-retardant sealing of window connection joints and can also be used as a plasterable internal sealing.\u003c\/p\u003e\n\u003cp\u003eFor highly porous substrates, we recommend a primer with butyl \u0026amp; bitumen primer if butyl is used for bonding.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eInstallation instructions for window connection films INSIDE, red, full-surface self-adhesive, alternating, 25m\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eAll profile openings, e.g. cut edges of extensions and window sill profiles or continuous grooves in attached roller shutter boxes, must be sealed with sealant.\u003c\/li\u003e\n\n\u003cli\u003eThe surfaces to be bonded on the frame and the masonry must be clean and dry, free of dust, grease and release agents (e.g. on new plastic profiles).\u003c\/li\u003e\n\n\u003cli\u003eThe surface coating on wooden windows should be several days old, as otherwise escaping solvents can reduce tape adhesion. If necessary, dirt should be removed with grease-dissolving cleaning agents. Material compatibility must be ensured.\u003c\/li\u003e\n\n\u003cli\u003eFor highly absorbent, crumbling substrates, pre-treat the building with an adhesive primer, e.g. DRG spray primer, DRG spray adhesive or solvent-free primer.\u003c\/li\u003e\n\n\u003cli\u003eIn the event of breakouts in the masonry, a clean smooth screed must be created again.\u003c\/li\u003e\n\n\u003cli\u003eWhen bonding, the tapes must be applied to the frame without creases, parallel and pressed continuously. At the corners, allow the tapes to overlap and bond them in a driving rain-proof or airtight manner.\u003c\/li\u003e\n\n\u003cli\u003eMovement absorption must be ensured by sufficient loop formation in the area of the connection joint.\u003c\/li\u003e\n\n\u003cli\u003eMinimum bonding width on the window 15 mm, on the wall at least 30 mm\u003c\/li\u003e\n\n\u003cli\u003eThe sealing tape must be sufficiently bonded to the masonry in the area of the later plaster covering (rule of thumb: at least 75% of the contact surface).\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"DRG Dicht- und Klebetechnik GmbH","offers":[{"title":"100 mm","offer_id":52819079496000,"sku":"40000050250.1","price":41.8,"currency_code":"EUR","in_stock":true},{"title":"150 mm","offer_id":52819079528768,"sku":"40000050250.2","price":56.3,"currency_code":"EUR","in_stock":true},{"title":"200 mm","offer_id":52819079561536,"sku":"40000050250.3","price":75.8,"currency_code":"EUR","in_stock":true},{"title":"300 mm","offer_id":52819079594304,"sku":"40000050250.4","price":108.2,"currency_code":"EUR","in_stock":true},{"title":"70 mm","offer_id":52819079627072,"sku":"40000050250.5","price":32.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/7966\/7520\/files\/Fensteranschlussband_1.png?v=1784417251"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/7966\/7520\/collections\/fensterband_20innen.jpg?v=1785102164","url":"https:\/\/de-bg-dicht.com\/pt-br\/collections\/fab-innen.oembed","provider":"DE \u0026 BG Dicht GmbH","version":"1.0","type":"link"}